800L conical beer fermenter for microbrewery

800L conical beer fermenter for microbrewery

This is 800L conical beer fermentation tanks for microbrewery,the tank plates and accessories are made of international standard SUS304 stainless steel; When production,we use laser cutting and argon shielded welding, internal centralized pickling and passivation, accuracy ≤ 0.4 μ m；With 80-10mm polyurethane foam insulation;

The pipe fittings on the beer fermenters support DIN, ISO, SMS and other customized standards;Dimple cooling jacket which around the wall and bottom cone test pressure 0.4MPa; The working pressure of the tank is 0.15 MPa, and the test pressure is 0.4 MPa;

Top stainless steel dished head, lower 60 ° cone bottom; Manhole can be on top or side of the fermenter.

High precision temperature sensor, automatic temperature control, real-time feedback of temperature curve, supporting remote operation;

With cone bottom and angle between 60 ° and 90 °, it is convenient to recycle yeast after (main) fermentation. In order to ensure the good filtration of beer, yeast mostly uses strains with good cohesiveness;The fermentation tank body is equipped with a cooling jacket, and the cooling capacity can meet the process cooling requirements. The column part of the tank is equipped with 2~3 sections of cooling jacket, and the cone part is equipped with a section of cooling jacket. This structure is conducive to the settlement and preservation of yeast.The conical tank is a closed tank, which can recover CO2 and also conduct CO2 washing; It can be used as beer fermentation tank and beer storage tank.

The natural convection of liquor in the 800L fermentation tank is relatively strong. The higher the tank, the stronger the convection. The convection intensity is related to the tank shape, capacity and control of the cooling system.The conical tank is quite high, and the yeast with strong cohesion is easy to precipitate, while the yeast with poor cohesion needs to be separated by other means.The conical bottom fermentation tank is not only applicable to the fermentation below, but also applicable to the fermentation above. 

It is equipped with safety valve, pressure regulating valve, sampling valve, liquor outlet valve, blow down valve, dry inlet, inflation valve, CIP cleaning ball, etc.

                            The cooling pipes+insulation pipes+wrapped tape+temperature sensor wire

A complete beer refrigeration system in the microbrewery including glycol water tank, cold water tank, chiller, pump and relevant pipelines. Below is detailed instruction on the cooling system:

1. Glycol water tank specification: 100L-30000L;The tank plates and accessories are made of international standard SUS304 stainless steel; Laser cutting and argon shielded welding, internal centralized pickling and passivation, accuracy ≤ 0.4 μ m； Polyurethane foam insulation;

2. Chiller specification: 1HP-50HP;

3. Cooling pipes material: PPR, stainless steel;

4. Cooling pipes thermal insulation materials: rubber plastic sponge, polyurethane, etc;

5. Exterior decoration of cooling pipes: colored binding tape, iron sheet, stainless steel, etc

The price of the 800l conical fermenter is different because of various configuration.If you want add extra beer fermenters inside of your brewery,please send us your requirements on it,such as the quantity of the fermenters,the fittings on the fermenters,your brewery layout drawings...our sales engineer can send you a formal 800l beer fermenter quote for reference.