New design 300L combined brewhouse system
This is a set of new designed 300L combined brewhouse system for microbreweries.Below is the details instruction of the new type brewhouse system.
300L mash/lauter tun+300L hot water tank on the left
300L kettle/whirlpool tun on the right
Wort pump with VFD control
Wort pipes and valves
Operation platform
Control cabinet
The whole 300l combined beer brewing equipment plates and accessories are made of international standard SUS304 stainless steel; Laser cutting and argon shielded welding, internal centralized pickling and passivation, accuracy ≤ 0.4 μ m；
Steam jacket around the 300L mash tun and 300L wort kettle: working pressure 0.15MPa, test pressure 0.4MPa, super large heating area, heating rate 1-1.2 ℃/min, automatic temperature control;
The 300L boiling kettle is equipped with forced circulation to support boiling under pressure, ensuring 8-12% boiling strength, improving the utilization rate of heat energy, and can optionally be equipped with condensate recovery device;The whirlpool circulates tangentially, and the high and low liquid level discharge ports are equipped with baffles for hot solidified substances and hops decomposition substances;
Variable frequency automatic lifting plough cutter for 300L Mash/lauter tun, removable milling sieve plate, spacing 0.7mm, opening rate greater than 17%, multiple supporting points at the bottom, and backwashing device to reduce sanitary dead angle; Optional bottom grain discharging and automatic grain discharging devices are used to uniformly transport the grains to the outdoor wheat grain tank. The whole wort filter process is closed and has strong timeliness;
The 300L combined beer brewing equipment cost is also very good,and there are some option devices,which makes the price of the300L brewing equipment more flexible. If you want to build a microbrewery with such capacity,please contact with us,our sales engineer can send you a detailed quote for reference.Cheers!
